Plasser & Theurer 08-16 built in 1984

Description NT599

Cyclic action 1 sleeper tamping machine for tracks

Length over buffers 16.740 mm
Width: 3.050 mm
Wheel diameter: 840 mm
Total weight: 35 000 kg
engine: Scania
max speed self driven: 70km/h
max speed towed: 100 km/h
Minimal curve radius: 120 m
Combined lifting and lining unit
on-board computer type GVA
Heating and cooling system in the cabins
Illuminating and signalizing devices
good working condition

Gauge: 1435 mm

Year built: 1984

Product no.: NT599

Machine name:

Company: *

Contact: *

Your email adress: *

Phone: *

Fax:

Street: *

Postcode: *

City: *

Country: *

Your message:

Fields with * are mandatory.

Examples of machines to be sold

Dynamic Stopfexpress 09-3X

Continuous action three-sleeper levelling, lifting, lining and tamping machine with integrated stabilisation trailer for plain track.

Unimat 09-32/4S Dynamic

Continuous action two-sleeper levelling, lifting, lining and tamping machine with 3-rail lifting and 4-rail tamping with integrated stabilisation trailer for plain track and turnouts.

Duomatic 09-32 CSM

Continuous action two-sleeper or single-sleeper, levelling, lifting, lining and tamping machine for plain track.

Unimat 09-475/4S - N Dynamic

Turnout and track maintenance machine combines for the first time ever the functions of three machines: ballasting, tamping, regulating, stabilising, control measurement.

Unimat 08-475/4S

Cyclic action single-sleeper levelling, lifting, lining and tamping machine with three-rail lifting and four-rail tamping for turnouts and plain track.

Unimat 08-275/3S

Cyclic action single-sleeper levelling, lifting, lining and tamping machine with three-rail lifting for turnouts and plain track.

08-Metropolitan

Cyclic action single-sleeper levelling, lifting, lining and tamping machine with track- oder Split-Head- or switch tamping aggregates.

UST 79 S

Universal tamping machine is equipped with two bogies for working travel and with a three-axle road chassis and a semitrailer for transport by road.

This road-rail mobility enables transfer of the machine independently of the timetable and access to ballasted tracks, such as those of urban transport authorities, without difficulty. This ensures that even on rail networks with awkward access the UST 79 S makes it possible to perform maintenance with the highest quality at regular intervals.

USP 2005

High capacity ballast distributing and profiling machine with shoulder ploughs, centre plough, 5 m³ ballast hopper and one sweeper unit with transverse conveyor belt for plain track and turnouts.

SSP 203

Ballast distributing and profiling machine with shoulder ploughs, centre plough and sweeper unit with a transverse conveyor belt for plain track.

Combi Unimat 08-275
Cyclic action single-sleeper levelling, lifting, lining and tamping machine with three-rail lifting and integrated ploughing and sweeping trailer for plain track and turnouts

PBR 400

Ballast distributing and profiling machine with shoulder ploughs, front plough and sweeper unit for plain track.

DGS 62N

Dynamic track stabilizer for plain track and turnouts with two stabilising units with a vertical load of max. 356 kN.

KSP 2000

Continuous action profiling and stabilising machine for plain track and turnouts with shoulder ploughs, centre plough, two stabilising units, 4.5 m³ ballast hopper and sweeper unit with transverse conveyor belt and steep conveyor belt.

RM95-800

High capacity ballast cleaning machine for plain track with one excavating chain, two screening units, one stabilising unit, a finger screen, a metal separator, a ballast sharpening plant, a high-pressure ballast washing plant and a waste water clarification plant.

RM 80 UHR-N

Ballast cleaning machine for plain track and turnouts with one excavating chain, one screening unit and if required with supply of new ballast.

RM 74 BR UHR

Ballast cleaning machine for plain track and turnouts with one excavating chain, one screening unit and on request with additional axles to reduce the maximum axle load. Machine especially suited for work on lines with tight clearance gauge and for narrow gauge tracks.

MFS 100

Material conveyor and hopper unit for continuous loading and unloading with a storage capacity up to 68 m³, floor conveyor belt and a pivoting transfer conveyor belt at the front.

MFS 40

Material conveyor and hopper unit for continuous loading and unloading, with a storage capacity of up to 40 m³, floor conveyor belt.

SUZ 500 Universal

Continuous action track renewal machine equipped to return the graded and / or excavated ballast to the track.

SMD 80

Continuous action track renewal machine for renewal and removal of track, can also be used as a track laying machine after fast conversion at start of worksite.

OBW 100

Heavy-duty track motor vehicle with loading platform and special crane with work cage, also suitable for bridge inspection.

THE platform for used track machines

Plasser & Theurer 08-16 built in 1984

monoblock wheels 920 mm for sale

Plasser & Theurer EM-SAT built in 2004

Plasser & Theurer USP 2000 SWS ballast regulator, used

Locomotive BR 216 used

set of lifting and lining aggregates for 09-32 CSM or 08-32, used

hopper wagons Fals, used

Plasser & Theurer 08-16 built in 1984

set of tamping unit frames for 09-32 CSM or 08-32, used

used SVM 2000 Rail laying machine

Plasser & Theurer 08-275 ZW - used self-loading switch tamping machine